A片毛片免费视频在线看

      1. <th id="igcrr"><noscript id="igcrr"></noscript></th>
        1. <span id="igcrr"><noframes id="igcrr">

          Contact Us

          Contact: Toby

          Mob: +8618921102679

          TEL: +86-510-83394067
          Fax: +86-510-83383382
          E-mail: kdsales@wxkdyr.com
          Address:No.18 Yanyu Road, Qianzhou Town, Huishan District, Wuxi City, Jiangsu Province, China

          Home > Knowledge > Content
          Safe operation and operation of transferring papers printing machine
          Jun 27, 2019

          The transferring papers printing machine is responsible for supervising the safety of the machine equipment and the crew of the unit. Before carrying out the work, the operator must dress the work clothes, work hats and work shoes neatly, fasten the clothes placket and cuffs, and the clothes pockets are not easy to install. Nothing, no watches and accessories.

           

          Before the transfer paper press is turned on, the required lubricating oil (grease) should be added to each oil filling point, lubrication point and fuel tank of the machine. Without approval, non-members of the crew may not start or operate the machine without authorization. Assistants and apprentices shall work under the guidance of the pilot.

           

          Before the machine is started, the transfer paper printing machine can effectively check whether there are any sundries in various parts of the fuselage before the machine starts. It must first give a signal, echoing back and forth, and determining the safety around the machine before starting. Before the machine is running, first reverse the number of weeks, and then a few weeks, in order to avoid debris between the rollers to damage the blankets, plates and so on.

           

          In the process of machine running, the transfer paper printing machine is strictly prohibited to touch the moving working surface by hand. It is not allowed to repair and wipe the machine. It is not allowed to cross the rotating part, and the machine protection device should be kept complete. The crew should strictly observe the position according to the division of labor, pay attention to the operation of all parts of the machine at all times, and immediately stop the problem after finding the problem.

           

          http://www.bringapillow.com/

           


          Previous: Maintenance requirements and design of vertical cylinder printing machine

          Next: Advantages and operating procedures of garment sample dyeing machine

          A片毛片免费视频在线看
            1. <th id="igcrr"><noscript id="igcrr"></noscript></th>
              1. <span id="igcrr"><noframes id="igcrr">