A片毛片免费视频在线看

      1. <th id="igcrr"><noscript id="igcrr"></noscript></th>
        1. <span id="igcrr"><noframes id="igcrr">

          Contact Us

          Contact: Toby

          Mob: +8618921102679

          TEL: +86-510-83394067
          Fax: +86-510-83383382
          E-mail: kdsales@wxkdyr.com
          Address:No.18 Yanyu Road, Qianzhou Town, Huishan District, Wuxi City, Jiangsu Province, China

          Home > Knowledge > Content
          Working process and type requirements of carpet stenter coating machine
          Jul 02, 2019

          In the process of working on the carpet stenter coating machine, the natural fiber fabrics such as cotton yarn, silk and wool have a certain degree of moist heat plasticity. After dyeing and processing, after scouring, drifting, dyeing, washing and other wet heat processing, the whole The warp direction is elongated and the weft direction is shortened, and the cloth surface is not flat. By the warming of the tenter and the lateral drafting effect, the weft direction can be widened and uniform, and the cloth surface is flat and beautiful, and can also be reduced. The deformation of the fabric during the tailoring process.

           

          There are many types of carpet-type tenter in use, but the basic structure is nothing more than the following combination parts, which are used to guide the fabric smoothly into the tenter, generally by a plurality of guide rolls, suction The edger consists of a bracket with a roller.

           

          There are two kinds of carpet tenter on the carpet: the cotton cloth and the wool fabric are used in the needle board type and the silk cloth type, which is used to fasten the cloth surface and to apply tension to the two sides to stretch the cloth surface. There are two types of open and oven type. Generally, the cotton cloth is used in a closed oven type, and the silk is used in an open type, which is heated by steam and sprayed to the wet.

           

          After the fabric is drawn by the needle plate or the cloth, the edge of the cloth will have a rugged ruffle. After the ironing with the steam in the middle, the flange will be eliminated, and at a higher temperature, It is also possible to relatively stabilize the size of the spreaded door frame, and at the same time, it can iron the cloth surface evenly and brightly.

           

          http://www.bringapillow.com/

           


          Previous: Working process and cloth discharging device of wool scouring machine

          Next: Maintenance requirements and design of vertical cylinder printing machine

          A片毛片免费视频在线看
            1. <th id="igcrr"><noscript id="igcrr"></noscript></th>
              1. <span id="igcrr"><noframes id="igcrr">